Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Manual de usuario descargar pdf (Pagina 21)

www.johnsonsystems.com 21

14. SH TIME Set the DMX status hold time from 0 to 99 minutes or innite.

When DMX is disconnected the system will hold the status of the last received DMX

levels for the selected amount of time. When activated, the LCD display shows a

countdown of the status hold time or innite hold.

Press EXECUTE to enter the menu.

HTIME 00 Displays the current DMX status hold time (HTIME) setting.

HTIME 99 Press MENU ( ) to set the desired hold time from 00 to 99 minutes.

HTIME XX Press MENU ( ) to set the desired hold time to innite (XX).

HTIME 00 Press both MENU ( ) switches to toggle back to status hold time of 00.

Press ESCAPE to exit the menu and save the desired DMX status hold time.

Press RESET to exit the menu without saving.

The menu will automatically timeout after 2 minutes of inactivity and save.

15. DC PATCH Congure the dimmer to channel patch for the dimmer rack.

Each of the 96 dimmer (PWM) outputs can be assigned and patched to any of the 96

control channels. Multiple dimmer outputs may be patched to a single control channel.

The dimmer to channel patch is used by other menu features to provide transparent

control of the dimmer output circuits. JS-ICON™ Series dimmer racks are typically

patched for 1 to 1 operation but may be altered for custom applications.

Press EXECUTE to enter the menu.

D01<C01 Displays the dimmer (D) output (01) and its current control channel (C) patch (01).

D24<C24 Press MENU ( ) to select the desired dimmer output from 01 to 24.

D24 C24< Press EXECUTE to toggle the pointer (<) to select the control channel to patch.

D24 C01< Press MENU ( ) to select the desired control channel from 01 to 24.

D24<C01 Press EXECUTE to toggle the pointer (<) to select another dimmer output.

Press ESCAPE to exit the menu and save the desired dimmer channel patch.

Press RESET to exit the menu without saving.

The menu will automatically timeout after 2 minutes of inactivity and save.

NOTE: DMX O/P must be set to OFFSET mode for this menu to function.

16. DIM CURV Congure the dimmer curve for each output.

There are four different dimmer curve proles that can be assigned to each individual

dimmer output circuit. Square Law (SQ) curve is the industry standard and the default

for all dimmers. Linear (LN) curve modies the dimmer output for a linear relationship

to the control input level. Direct Drive (DD) curve is not modied - meaning the control

input level is directly proportional to the control output level. Non-Dim (ND) curve

assigns the dimmer circuit to operate in a full-on or off state only, with no dimming.

Dimmers set for non-dim will be triggered full-on at 55% control input and will be

triggered off again at 45% control input.

Press EXECUTE to enter the menu.

DIM01 SQ Displays the dimmer (DIM) output (01) and its current dimmer curve.

DIM24 SQ Press MENU ( ) to select the desired dimmer number from 01 to 24.

DIM24 LN Press EXECUTE to toggle to linear (LN) curve mode.

DIM24 DD Press EXECUTE to toggle to direct drive (DD) mode.

DIM24 ND Press EXECUTE to toggle to non-dim (ND) mode.

Press ESCAPE to exit the menu and save the desired dimmer curves.

Press RESET to exit the menu without saving.

The menu will automatically timeout after 2 minutes of inactivity and save.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Comentarios a estos manuales

Sin comentarios

Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1