WWW.JOHNSONSYSTEMS.COM
16
Quick Programming Reference to System Configuration Menu Items
1. DMX TYPE Set the DMX output data rate to fast, medium or slow.
2. DMX PORT Turn the power on or off for each of the 6 DMX input ports.
3. TECHPORT Enable or disable the USB Tech Port used to monitor DMX via a PC.
4. RTIME View the total run time of the microcontroller.
5. HARD-KEY View the microcontroller’s unique eight-character hard-key code.
6. SERIAL# View the microcontroller’s unique eight-character silicone serial number.
7. VERSION View the microcontroller’s rmware version.
8. EEPROM View the type of EEPROM memory module plugged in.
9. FW-LOAD Load rmware into the microcontroller via the EEPROM memory module.
10. LCD VIEW Adjust the contrast of the LCD Display for optimum viewing.
Detailed Programming of System Configuration Menu Items
NOTE: The programming switches can be locked out to prevent inadvertent conguration
changes. To toggle between “LOCKED!!” and “UNLOCKED” press and hold down the
EXECUTE and then ESCAPE switches at the same time for 4-5 seconds.
The sequence of the following system conguration menu items appear as the MENU DOWN ( ) switch
is pressed. Pressing the MENU UP ( ) switch will sequence the system conguration menu items in the
opposite order. Pressing and holding either of the MENU UP/DOWN ( ) switches will speed up the scroll
rate, which can be helpful to speed up the conguration time.
1. DMX TYPE Set the DMX output data rate to fast, medium or slow.
The DMX output data rate may be adjusted for compatibility with some older legacy
DMX equipment incapable of receiving the maximum DMX output data rate. If there
is a problem receiving DMX from the DMX 6-PORT MERGER, try adjusting the DMX
output data rate.
FAST is the maximum setting for the DMX output data rate, transmitting 44pps
(Packets Per Second). FAST is the factory default.
MEDIUM is the intermediate setting for the DMX output data rate, transmitting 37pps
(Packets Per Second).
SLOW is the minimum setting for the DMX output data rate, transmitting 30pps
(Packets Per Second).
FAST Press EXECUTE to toggle the DMX output data rate to FAST.
MEDIUM Press EXECUTE to toggle the DMX output data rate to MEDIUM.
SLOW Press EXECUTE to toggle the DMX output data rate to SLOW.
Any change in the conguration is automatically saved.
2. DMX PORT Turn the power on or off for each of the 6 DMX input ports.
Each of the 6 DMX input ports may be powered off to conserve energy when DMX
input(s) are not connected or in use. Powering off DMX input port(s) may also be
used as a troubleshooting tool. When the DMX input port power is off, DMX can not
be received on the input. The corresponding green RX LED is illuminated when the
power is on and extinguished when the power is off. All 6 of the DMX input ports are
powered on by factory default.
Press EXECUTE to enter the menu.
IN 1 ON Displays the DMX input (IN 1) port and the power setting (ON).
IN 6 ON Press MENU ( ) to select the DMX input port from 1 to 6.
IN 6 OFF Press EXECUTE to toggle the power setting ON or OFF.
Any change in the conguration is automatically saved.
(12 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales